Displaying Rf Neighborhood Information - 3Com WX1200 Reference Manual

Displaying RF In the RF Monitor view, select the RF Neighborhood tab at the bottom of
Neighborhood the window.
Information
The RF Neighborhood tab lists the transmitters that can hear or are heard
by the radio selected in the top section of the window. You can select the
viewpoint of the list:
Information is displayed for a radio if the radio sends beacon frames or
responds to probe requests. Even if a radio's SSIDs are unadvertised,
3Com radios detect the empty beacon frames (beacon frames without
SSIDs) sent by the radio, and include the radio in the neighbor list.
Table 54 lists the information displayed on the tab.
Table 54 RF Monitor RF Neighborhood Columns
To list the other transmitters that the selected radio can hear, select
Transmitters.
To list the other transmitters that can hear the selected radio, select
Listeners.
Column
Neighbor
Description
MAP name and radio number.
Note — This information comes from the site plan and is
displayed only if the MAP is in the plan.
Using the RF Monitor View 445