Displaying And Maintaining Device Configuration - 3Com 4210G Series Configuration Manual

To do...
Restore the startup
configuration file to be used at
the next system startup
The restore operation restores the main startup configuration file.
Before restoring a configuration file, you should ensure that the server is reachable, the server is
enabled with TFTP service, and the client has read and write permission.
After the command is successfully executed, you can use the display startup command (in user
view) to verify that the filename of the configuration file to be used at the next system startup is the
same with that specified by the filename argument, and use the dir command to verify that the
restored startup configuration file exists.

Displaying and Maintaining Device Configuration

To do...
Display the information about
configuration rollback
Display the currently running
configuration file saved on the
storage medium of the device
Display the configuration files
for this and the next system
startup
Display the validated
configuration in current view
Display the current
configuration
For detailed description of the display this and display current-configuration commands, refer to
Basic System Configuration Commands in the System Volume.
Use the command...
restore startup-configuration
from src-addr src-filename
Use the command...
display archive configuration
display saved-configuration
[ by-linenum ]
display startup
display this [ by-linenum ]
display current-configuration
[ [ configuration [ configuration ] |
interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ |
{ begin | include | exclude } text ] ]
11-17
Remarks
Required
Available in user view
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view