Notes On Configuring Raid; Notes On A Multiple Lan Adapter Configuration; Cautions For Using Serverstart - PRIMERGY BX620 S3 User Manual

2.3.2 Notes on Configuring RAID

RAID can be configured with hard disk units connected to the SAS controller on the baseboard.
For available RAID level, configuration of RAID and cautions, refer to "Integrated Mirroring SAS
User's Guide" in the Array Controller Document & Tool CD.
●
Hardware Configuration
• Only internal hard disk units can be used.
• Be sure to use hard disk units of the same model and with the same capacity.

2.3.3 Notes on a Multiple LAN Adapter Configuration

Using the OS installation wizard of ServerStart, you can configure multiple LAN adapters (network
adapters) on the system. However, there are the following limitations.
●
Adapter Numbers
To configure multiple LAN adapters, select the adapter numbers in order of Adapter 1 and Adapter 2,
and enter settings for each adapter. Note that the order of adapter numbers is not necessarily the same as
the onboard LAN port numbers. This means that the setting for Adapter 1 is not always applied to LAN
port 1 of the onboard LAN. After installing the OS, check the LAN adapters to make sure that they are
configured as intended.

2.3.4 Cautions for Using ServerStart

■ Operating ServerStart
Most ServerStart operations are performed with the mouse. Items may not be moved with the [Tab] key
or cursor keys. Be sure to use the mouse when operating ServerStart.
■ Ejecting the CD-ROM
Do not eject the ServerStart CD-ROM while ServerStart is running. If the ServerStart CD-ROM is
ejected and inserted again, ServerStart starts up in multiple windows, and settings you have made can be
lost.
■ ServerStart CD-ROM
ServerStart supplied with the server is two-CD set (Disc 1 and Disc 2).
Disc 1 is used to create the configuration file and install the OS.
Disc 2 is used when you are requested to insert it during installation.
PRIMERGY BX620 S3 Server Blade User's Guide
1
2
3
4
5
6
7
8
9
39