Three-Phase 200 V Class Drives; Three-Phase 200 V Class Drives - YASKAWA E1000 Technical Manual

A.1 Three-Phase 200 V Class Drives
A.1 Three-Phase 200 V Class Drives
Item
CIMR-E2A
Maximum Applicable Motor Capacity (kW)
Input Current (A)
Rated Voltage
Rated Frequency
Input
Allowable Voltage Fluctuation
Allowable Frequency Fluctuation
Input Power (kVA)
Rated Output Capacity (kVA)
Rated Output Current (A)
Overload Tolerance
Output
Carrier Frequency
Maximum Output Voltage (V)
Maximum Output Frequency (Hz)
<1> The motor capacity (kW) refers to a Yaskawa 4-pole motor. The rated output current of the drive output amps should be equal to or greater than
the motor rated current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> DC is not available for UL/CE standards.
<4> Rated motor capacity is calculated with a rated output voltage of 220 V.
<5> Current derating is required in order to raise the carrier frequency.
<6> User adjustable
350
Table A.1 Power Ratings (Three-Phase 200 V Class)
0004 0006 0008 0010 0012 0018 0021 0030 0040 0056 0069 0081 0110 0138 0169 0211 0250 0312 0360 0415
0.7 1.1 1.5 2.2
<1>
3.9 7.3 8.8 10.8 13.9 18.5
<2>
2.2 3.1 4.1 5.8
1.3 2.3 3 3.7
<4>
3.5 6 8 9.6
<5>
Specification
3 3.7 5.5 7.5 11 15
24 37 52 68
Three-phase 200 to 240 Vac 50/60 Hz/270 to 340 Vdc
-15 to 10%
±5%
7.8 9.5 14 18 27 36
4.6 6.7 8 11.4 15.2 21
12 17.5 21 30 40 56
120% of rated output current for 60 s
Note: Derating may be required for applications that start and stop frequently.
1 to 15 kHz
<6>
Three-phase 200 to 240 V (proportional to input voltage)
200 Hz
YASKAWA ELECTRIC SIEP C710616 35D YASKAWA AC Drive E1000 Technical Manual
18.5 22 30 37 45 55
80 96 111 136 164 200
<3>
44 52 51 62 75 91
26 31 42 53 64 80
69 81 110 138 169 211
1 to 10 kHz
<6>
75 90 110 110
271 324 394 471
124 148 180 215
95 119 137 158
250 312 360 415
<6>