Epson S1C17F13 Technical Manual page 139

12 I 2 C (I2C)
Bit 7 BYTeenDie
Bit 6 GCie
Bit 5 naCKie
Bit 4 STOPie
Bit 3 STaRTie
Bit 2 eRRie
Bit 1 RBFie
Bit 0 TBeie
These bits enable I2C interrupts.
1 (R/W): Enable interrupts
0 (R/W): Disable interrupts
The following shows the correspondence between the bit and interrupt:
I2CnINTE.BYTEENDIE bit: End of transfer interrupt
I2CnINTE.GCIE bit:
I2CnINTE.NACKIE bit:
I2CnINTE.STOPIE bit:
I2CnINTE.STARTIE bit:
I2CnINTE.ERRIE bit:
I2CnINTE.RBFIE bit:
I2CnINTE.TBEIE bit:
12-22
General call address reception interrupt
NACK reception interrupt
STOP condition interrupt
START condition interrupt
Error detection interrupt
Receive buffer full interrupt
Transmit buffer empty interrupt
Seiko epson Corporation
S1C17F13 TeChniCal Manual
(Rev. 1.0)