5 INTERRUPT CONTROLLER (ITC)
Vector number/
Software interrupt
Vector address
number
4 (0x04)
TTBR + 0x10
5 (0x05)
TTBR + 0x14
6 (0x06)
TTBR + 0x18
7 (0x07)
TTBR + 0x1c
8 (0x08)
TTBR + 0x20
9 (0x09)
TTBR + 0x24
10 (0x0a)
TTBR + 0x28
11 (0x0b)
TTBR + 0x2c
12 (0x0c)
TTBR + 0x30
13 (0x0d)
TTBR + 0x34
14 (0x0e)
TTBR + 0x38
15 (0x0f)
TTBR + 0x3c
16 (0x10)
TTBR + 0x40
17 (0x11)
TTBR + 0x44
18 (0x12)
TTBR + 0x48
19 (0x13)
TTBR + 0x4c
20 (0x14)
TTBR + 0x50
5-2
Hardware interrupt name
Supply voltage detector
Low power supply voltage detection
interrupt
Port interrupt
Port input
Clock generator interrupt
• OSC3A oscillation stabilization waiting completion
• OSC1 oscillation stabilization waiting completion
• OSC3B oscillation stabilization waiting completion
Real-time clock interrupt
• 1 day
• Half day
• 1 hour
• 10 minutes
• 1 minute
• 10 seconds
• 1 Hz
• 4 Hz
• 8 Hz
• 32 Hz
16-bit timer Ch.0 interrupt
Underflow
UART interrupt
• End of transmission
• Framing error
• Parity error
• Overrun error
• Receive buffer two bytes full
• Receive buffer one byte full
• Transmit buffer empty
16-bit timer Ch.1 interrupt
Underflow
SPI Ch.0 interrupt
• End of transmission
• Receive buffer full
• Transmit buffer empty
I
2
C interrupt
• End of data transfer
• General call address reception
• NACK reception
• STOP condition
• START condition
• Error detection
• Receive buffer full
• Transmit buffer empty
Clock timer interrupt
• 32 Hz
• 8 Hz
• 2 Hz
• 1 Hz
16-bit timer Ch.2 interrupt
Underflow
SPI Ch.1 interrupt
• End of transmission
• Receive buffer full
• Transmit buffer empty
16-bit timer Ch.3 interrupt
Underflow
SPI Ch.2 interrupt
• End of transmission
• Receive buffer full
• Transmit buffer empty
16-bit PWM timer Ch.0
• Capture B overwrite
interrupt
• Capture A overwrite
• Capture B
• Capture A
• Compare B
• Compare A
16-bit PWM timer Ch.1
• Capture B overwrite
interrupt
• Capture A overwrite
• Capture B
• Capture A
• Compare B
• Compare A
R/F Ch.0 converter interrupt • Reference oscillation completion
• Sensor A oscillation completion
• Sensor B oscillation completion
• Measurement counter overflow error
• Time base counter overflow error
Seiko epson Corporation
Hardware interrupt flag
S1C17F13 TeChniCal Manual
Priority
High
*1
↑
(Rev. 1.0)