Table of Contents
Advertisement
45.3.3
Description
Requirements
Access step-by-step
Survey - General
Real-Time Rover Operations
Refer to "45.2 GPS Surveying Techniques" for information on the real-time rover surveying
technique.
•
A typical configuration set for real-time rover operations is used.
•
A real-time interface is configured correctly.
•
The according real-time device is attached and working properly.
The table describes the main access to SURVEY Survey: Job Name.
Access is possible from other screens where individual point measurements are needed, for
example from COGO Inverse with SURVY (F5).
Step
Description
1.
Refer to "45.1 Accessing Survey" to access SURVEY Survey Begin.
2.
In SURVEY Survey Begin select a job.
3.
Select a typical configuration set with <R-Time Mode: Rover>.
4.
Select an antenna.
5.
CONT (F1) to access SURVEY Survey: Job Name.
The arrow at the real-time device and real-time status icon flashes when real-time
messages are being received.
Fixing ambiguity begins. The current position status is indicated by the position
status icon. When working with code only corrections, an ambiguity solution is not
attempted.
The position mode icon is the moving icon. This indicates that the antenna can be
moved around and that no static observations are being recorded.
GPS1200+
1202
Advertisement
Table of Contents
