Table of Contents
Advertisement
46
46.1
Description
Coding of auto points
Survey - Auto Points
Survey - Auto Points
Overview
Auto points is used to automatically log points at a specific rate. Additionally, individual auto
points can be stored outside the defined rate. Auto points are used in real-time or post-proc-
essed moving applications to document the track which was walked or driven along. Auto
points are logged between starting and stopping logging of auto points form one chain. A new
chain is formed each time logging of auto points is started.
Auto points can be collected in the Survey application program. An Auto page is visible when
logging of auto points is active.
Up to two offset points related to one auto point can be logged. The offset points can be both
to the left or right and they can be coded independently of each other and of the auto points.
Refer to "46.4 Offset Points of Auto Points".
Logging of auto points is possible for <R-Time Mode: Rover> and <R-Time Mode: None>.
Coding of auto points is similar to coding manually occupied points. Refer to "11 Coding" for
information on coding.
The differences are:
•
Thematical coding:
•
Free coding:
•
Quick coding:
•
Codes of auto points overwrite the codes of points existing in the active job with the same
point ID but with a different code as the auto point.
Available for <Store: DBX(Pts&Codes)> in SURVEY Configu-
ration, Auto Points page.
Always available.
Not available.
GPS1200+
1221
Advertisement
Table of Contents
