Adjustments; Test Software And Information Available On The Web; Tme Downloads; Agilent Fieldfox Customer Support Web Pages - Agilent Technologies FieldFox N9923AN Service Manual

Rf vector network analyzer

Table of Contents

Tests and Adjustments

RF Vector Network Analyzer

N9923AN

Adjustments

Frequency Accuracy

Locks to Ext Ref 10 MHz signal via DAC. Stores DAC setting to use when not in External

Reference mode.

Phase Lock Accelerator

This process creates factors for various phase lock capture speeds used during

measurements. No test equipment is required.

Error Terms

This adjustment process updates the correction information used by CalReady (i.e. the

Factory Cal). It uses an ECal to perform a one port cal on each port, then completes a two

port cal using the thru and loads.

Note: The Error Terms adjustment should be performed every twelve months to preserve

calibration accuracy of CalReady.

Test Software and Information Available on the Web

Information and download links for the N7841A application are available at

www.agilent.com/find/calibrationsoftware. This web site provides links for downloading

software and user instructions. Note that the N7800A software must be installed prior to

installing the N7841A and it requires a separate license.

The web page for the N7841A download also provides a link to the N7841A help. This help

system provides user instructions and lists of required equipment. It may be accessed prior

to downloading the software.

The following URL provides updated help and additional information for using TME with

FieldFox. Consult it for the most up-to-date information.

http://na.tm.agilent.com/fieldfox/tme_info.html

3-8

Service Guide N9923-90005

Table of Contents