Remounting - Suzuki sq-416-420-625 Service Manual

"A", (d)
"A": Sealant 99000-31110
Tightening torque
(a): 50 N·m
5.0 kg-m
36.5 lb-ft
(b): 65 N·m
6.5 kg-m
47.0 lb-ft
(c): 85 N·m
8.5 kg-m
61.5 lb-ft
(d): 78 N·m
7.8 kg-m
56.5 lb-ft
1. Drive plate
2. Torque converter
3. Case right stiffener (if equipped)
4. Automatic transmission

REMOUNTING

WARNING:
When moving transmission assembly with torque convert-
er equipped in it, be sure to keep it horizontal. Tilting it with
its front facing down may allow converter to fall off. Where-
by an injury may result.
For remounting, reverse dismounting procedure. Use specified
torque as given below and left.
Tightening torque
Exhaust No.1 pipe to manifold
bolts or nuts
Muffler to exhaust No.2 pipe
nuts
Universal joint flange bolts and
nuts
D Oil filler tube bolts
D Select cable bracket bolts
D Clamp wiring harness and hoses securely.
D Refer to "Select Cable" section for adjusting procedure of select
cable.
D Refer to "A/T Throttle Cable" section for tuning of A/T throttle
cable.
D Follow fluid level check procedure for refilling automatic transmis-
sion fluid and its level adjusting.
D Connect battery, and confirm that engine and transmission func-
tion acceptably.
D When remounting drive plate, use specified bolts.
AUTOMATIC TRANSMISSION (4 A / T) 7B1-77
.
N m kg-m
50 5.0
60 6.0
50 5.0
23 2.3
Tightening torque
(a): 50 N·m (5.0 kg-m, 36.5 lb-ft)
1. Automatic transmission
2. Transfer (4WD)
3. Engine rear mounting
4. Engine rear mounting member
lb-ft
36.5
43.5
36.5
17.0