Suzuki sq-416-420-625 Service Manual page 211

8) Remove stabilizer bar, refer to steps 2) to 5) of item STABILIZ-
ER BAR/BUSHINGS REMOVAL in this section.
9) Disconnect tie rod end from knuckle by using puller.
10) Support lower arm, using jack as shown.
11) Remove strut bracket bolts.
12) Remove ball stud castle nut.
13) Using puller, disconnect knuckle from ball stud.
14) Remove knuckle and wheel hub comp, while lowering jack.
15) Remove coil spring.
1. Coil spring
FRONT SUSPENSION 3D-9