Condenser Dryer (Receiver/Dryer) - Suzuki sq-416-420-625 Service Manual

1B-36 AIR CONDITIONING (OPTIONAL)
1
2
2. Condenser dryer section

CONDENSER DRYER (RECEIVER/DRYER)

REMOVAL
1) Remove A/C condenser assembly (1) from vehicle (Refer to
"A/C CONDENSER ASSEMBLY REMOVAL" in this section.).
2) Remove the condenser dryer cap from condenser.
3) Remove the filter (1) from the condenser (2).
4) Remove the dryer (1) using a plier (2).
INSTALLATION
Reverse removal sequence to install condenser dryer, according to
instruction manual with supply parts.
NOTE:
D When replacing condenser dryer, add 40 cc of refrigerating
oil the same as compressor oil.
D Do not remove the dryer from the plastic bag until just before
inserting it into the receiver.
D Install the condenser dryer (1) with its double-layer portion
facing the bottom of the receiver.
D If condenser dryer cap installing is bolt type, tighten speci-
fied torque for its bolt.
Tightening Torque:
.
Cap: 12.5 N m (1.25 kg-m, 9 lb-ft)