Suzuki sq-416-420-625 Service Manual page 517

1. Mounting bracket bolt
2. Flange bolt and nut
1. Bolts
DISMOUNTING
1) Lift up vehicle and drain oil.
2) Disconnect air hose and breather hose from differential housing.
3) Before removing propeller shaft, give match marks on joint
4) Remove propeller shaft flange by removing its 4 bolts and sus-
A: Match marks
5) Remove 3 bolts for left mounting bracket and 3 bolts for drive
6) Remove 2 bolts from cross member to set differential rear
7) With differential housing assembly held with transmission jack,
1. Mounting bracket bolt
2. Mounting bracket R
3. Differential housing
flange and propeller shaft as shown.
pend it with cord or the like.
NOTE:
If pull out propeller shaft, transfer oil must be drained be-
fore pulling out.
shaft flange to set left side of differential free.
mounting free.
remove mounting bolts on right end of housing.
DIFFERENTIAL (FRONT) 7E-15