Front Disc Brake Caliper - Suzuki sq-416-420-625 Service Manual

5B-6 FRONT BRAKE

FRONT DISC BRAKE CALIPER

REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove brake flexible hose mounting bolt from caliper. As this
1. Caliper
2. Flexible hose
3. Hose mounting bolt
4. Wire hook
5. Container
3) Remove caliper pin bolts.
4) Remove caliper.
DISASSEMBLY
Before disassembly, clean all around caliper with brake fluid.
1) Remove anti noise shim (if equipped) and blow compressed air
1. Cloth
will allow fluid to flow out of hose, have a container ready before-
hand.
into cylinder through bolt hole where flexible hose was fitted.
With this air pressure, piston can be pushed out of cylinder.
WARNING:
Do not apply too highly compressed air which will cause
piston to jump out of cylinder. It should be taken out grad-
ually with moderately compressed air. Do not place your
fingers in front of piston when using compressed air.