Suzuki sq-416-420-625 Service Manual page 769

REPAIRS AND INSPECTIONS REQUIRED AFTER AN ACCIDENT
CAUTION:
D All air bag system components, including the electrical harness (component mounting points), must
be inspected after an accident. If any components are damaged or bent, they must be replaced even
if air bag system activation did not occur.
D Never use air bag system parts from another vehicle.
D Do not attempt to service the parts below. Service of these parts is by replacement only.
– Driver/Passenger air bag (inflator) module
– Driver/Passenger seat belt pretensioner
– SDM
– Contact coil and combination switch assembly
– Air bag wire harness
D Proper operation of the sensors and air bag system requires that any repairs to the vehicle structure
return it to its original production configuration.
CAUTION:
After detecting one time of such collision as to meet deployment conditions, the SDM must not be used.
Refer to "Diagnosis" when checking the SDM.
ACCIDENT WITH DEPLOYMENT – COMPONENT
REPLACEMENT
Certain air bag system components must be replaced. Those com-
ponents are:
D Driver and passenger air bag (inflator) modules
– Replace with new one.
D Driver and passenger seat belt pretensioners
– Replace with new one as an assembly.
D SDM after detecting such collision as to meet deployment condi-
tions
– Replace with new one.
AIR BAG SYSTEM 10B-63