Suzuki sq-416-420-625 Service Manual page 576

WINDOWS, MIRRORS, SECURITY AND LOCKS 8D-21
6) Connect negative cable at battery.
7) Check that the voltage and resistance between following termi-
nals are specifications.
Terminals
E02-7 and
ground
E02-14 and
ground
When driver side door key
switch is OFF position
E02-8 and
ground
When driver side door key
switch is LOCK position
When driver side door key
switch is OFF position
E02-9 and
ground
When driver side door key
switch is UNLOCK position
If check result is not satisfactory, repair circuit and recheck.
If check result is satisfactory, replace controller.
KEY CYLINDER SWITCH (DRIVER SIDE)
Check for continuity between terminals according to the key action
shown below.
Terminal
3
Key
LOCK
OFF
UNLOCK
Condition
Anytime
Anytime
2 1
Specification
10 – 14 V
continuity
No continuity
Continuity
No continuity
Continuity