3E-18 REAR SUSPENSION
1. Axle housing
2. Jack
13) For jobs hereafter, support rear axle housing by using floor jack
14) Remove differential carrier assembly.
1. Differential carrier
assembly
2. Differential carrier nut
15) Loosen rear mount nut of upper rod but don't remove bolt.
16) Loosen rear mount nut of lower rod but don't remove bolt.
1.
Lower rod
2.
Lower rod rear
mount nut
3.
Shock absorber
17) Remove rear axle side lateral rod mount bolt.
18) Remove shock absorber lower mount bolt.
1. Lower mount
bolt
19) Lower floor jack until tension of suspension coil spring be-
20) Lower rear axle housing gradually.
21) Remove axle housing.
under axle housing.
comes a little loose and remove rear mount bolt of upper , lower
and lateral rod.