Remounting Of Trans. Unit - Suzuki sq-416-420-625 Service Manual

7A-12 MANUAL TRANSMISSION (TYPE 1)

REMOUNTING OF TRANS. UNIT

For remounting, reverse dismounting procedure.
Use specified torques as given below.
Tightening Torque
(a): 85 N
(b): 50 N
D For tightening torque of transmission stiffener bolt, refer to
"ENGINE MECHANICAL" section.
D Set each clamp for wiring, hose and cable securely.
D Set clamp for shift control lever boots securely.
D After installing clutch operating cylinder, check clutch pedal free
travel. Refer to SECTION 7C1 "CLUTCH".
D Fill gear oil to transmission and transfer as specified.
D Connect battery and check function of engine, clutch and trans.
D When installing propeller shaft, align the match marks.
1. Match mark
.
m (8.5 kg-m, 61.5 lb-ft)
.
m (5.0 kg-m, 36.5 lb-ft)