Precautions; Precautions For Vehicle Equipped With A Supplemental Restraint (Air Bag) System; Diagnosis - Suzuki sq-416-420-625 Service Manual

1. Air bag wire harness 5. Contact coil
2. Passenger air bag 6. Driver air bag (inflator)
(inflator) module
3. SDM 7. Seat belt pretensioner
4. DLC

PRECAUTIONS

PRECAUTION FOR VEHICLES EQUIPPED
WITH A SUPPLEMENTAL RESTRAINT
(AIR BAG) SYSTEM
WARNING:
D The configuration of air bag system parts are as shown in
D If the air bag system and another vehicle system both
D Do not modify the steering wheel, dashboard, or any other
D If the vehicle will be exposed to temperatures over 938C
module
(if equipped)

DIAGNOSIS

D When troubleshooting air bag system, be sure to follow
D Never use electrical test equipment other than that specified
WARNING:
Never attempt to measure the resistance of the air bag (in-
flator) modules (driver and passenger) and seat belt preten-
tioners (driver and passenger). It is very dangerous as the
electric current from the tester may deploy the air bag or ac-
tivate the pretensioner.
the figure. When it is necessary to service (remove, rein-
stall and inspect) these parts, be sure to follow proce-
dures described in SECTION 10B. Failure to follow proper
procedures could result in possible air bag system activa-
tion, personal injury, damage to parts or air bag system
being unable to activate when necessary.
need repair, SUZUKI recommends that the air bag system
be repaired first, to help avoid unintended air bag system
activation.
air bag system components. Modifications can adversely
affect air bag system performance and lead to injury.
(2008F) (for example, during a paint baking process), re-
move the air bag system components beforehand to avoid
component damage or unintended air bag system activa-
tion.
"DIAGNOSIS" in SECTION 10B. Bypassing these proce-
dures may result in extended diagnostic time, incorrect diag-
nosis, and incorrect parts replacement.
in this manual.
GENERAL INFORMATION 0A-3