Power Sliding Roof (If Equipped) - Suzuki sq-416-420-625 Service Manual

8D-32 WINDOWS, MIRRORS, SECURITY AND LOCKS

POWER SLIDING ROOF (IF EQUIPPED)

INSPECTION
SLIDING ROOF SWITCH
Check switch for continuity between terminals as shown below.
Slide Switch (1)
Switch
OPEN
OFF
CLOSE
Tilt Switch (2)
Switch
UP
OFF
DOWN
3. To open
4. To close
SLIDING ROOF MOTOR ASSEMBLY
1) Remove head lining. Refer to Section 9 for detail.
2) Remove sliding roof motor assembly (1).
3) Connect known-good sliding roof switch (2) to sliding roof motor
assembly.
4) Connect 12 V battery positive terminal to terminal "A" of motor
assembly (1) and battery negative terminal to terminal "B" of mo-
tor assembly (1).
5) Check that the sliding roof motor (1) runs according to the move-
ment of the sliding roof switch (2).
If motor does not operate as above, replace sliding roof motor
assembly (1).
3. Left turn
4. Right turn
Terminal
C C
Terminal
E E
Sliding Roof Switch
Tilt up
Tilt down
Slide open
Slide close
D D F F
D D B B
Motor
turns left
turns right
turns right
turns left