Suzuki sq-416-420-625 Service Manual page 790

10B-84 AIR BAG SYSTEM
1
1) Turn ignition switch to "LOCK", remove key and put on safety
glasses.
2) Check that there is no open, short or damage in special tool (de-
ployment harness). If any faulty is found, do not use it and be
sure to use new deployment harness.
Special Tool
(A): 09932-75030
3) Short the two deployment harness leads together by fully seat-
ing one banana plug into the other.
WARNING:
Deployment harness shall remain shorted and not be
connected to a power source until the pretensioner is to
be activated.
Special Tool
1. Shorted
(A): 09932-75030
4) Remove driver or passenger seat belt pretensioner(s) and seat
belt pretensioner harness(s) from vehicle, referring to SECTION
10A.
WARNING:
D For handling and storage of a live seat belt pretension-
NG
D Never carry the seat belt pretensioner by the wires or
D When placing a live seat belt pretensioner on the work-
1
Otherwise, personal injury may result.
5) Temporarily place seat belt pretensioner on the workbench ac-
cording to above WARNING.
1. Exhaust hole
er, select a place where the ambient temperature below
658C (1508F), without high humidity and away from
electric noise.
connector on the underside of the pretensioner.
bench or some place like that, be sure not to lay with its
exhaust hole provided side facing down. it is also pro-
hibited to put something on its face with an exhaust
hole or to put a seat belt pretensioner on top of another.