INSTRUMENTATION / DRIVER INFORMATION 8C-13
DOOR SWITCH
INSPECTION
Remove door switch (1) from body and check switch for continuity.
If found defective, replace switch.
OFF position
No continuity
(Door closed)
ON position
Continuity
(Door open)
ON
OFF
SEAT BELT WARNING LIGHT (IF EQUIPPED)
SEAT BELT BUCKLE SWITCH
buckle out
INSPECTION
Check for continuity between seat belt buckle switch terminal A and
B at following condition.
buckle in
Buckle out (seat belt not fastened): Continuity
Buckle in (seat belt fastened): No Continuity
If seat belt buckle switch does not follow the above condition, re-
place seat belt buckle switch.
A