Suzuki sq-416-420-625 Service Manual page 568

BR
INT
REAR WIPER AND WASHER (IF EQUIPPED)
INSPECTION
Rear Wiper and Washer Switch (in Combination Switch)
ON
1) Disconnect negative cable at battery.
INT
2) Disconnect combination switch lead wire coupler.
3) Check for continuity between terminals at each switch position
WASHER
ON
as shown below. If check result is not as specified, replace
switch.
Rear Wiper Switch
Switch
Rear Washer Switch
Switch
Washer Pump
Refer to FRONT WIPER AND WASHER INSPECTION in this sec-
tion.
Wiper Motor
1) TESTING WIPER MOTOR
As shown left, use a 12 V battery to connect its (+) and (–) termi-
nals to terminal "D" and Black lead wire (2) respectively. Then
motor (1) should rotate at 35 to 45 rpm.
WINDOWS, MIRRORS, SECURITY AND LOCKS 8D-13
Terminal
BR BR
OFF
INT
ON
Terminal
BR BR
OFF
ON
INT INT +IR +IR
WR WR