ROOF RAIL (IF EQUIPPED)
ROOF MOLDING
REMOVAL AND INSTALLATION
D If roof rail is equipped, remove it in advance (refer to "ROOF RAIL" section).
D When reusing roof molding, be careful not to make roof molding warped.
1. Roof molding
2. Roof panel
3. Clip
4. Molding stud
Removal
1) Remove roof rail front and rear caps as shown in figure.
2) Remove nuts.
3) Remove roof rail assembly.
Installation
Reverse removal procedure for installation.
Confirm that each roof rail fixing nut is tightened securely.
BODY SERVICE 9-79
1. Roof rail assembly
2. Front cap
3. Rear cap
4. Base seal
5. Nut