Table of Contents
Advertisement
2) Remove piston seal using a thin blade like a thickness gauge,
etc.
CAUTION:
Be careful not to damage inside (bore side) of cylinder.
INSPECTION
Cylinder Boot
Check boots for breakage, crack and damage. If defective, replace.
Piston Seal
Excessive or uneven wear of pad lining may indicate unsmooth re-
turn of the piston. In such a case, replace rubber seal.
ASSEMBLY
Reassemble front brake in reverse order of disassembly, noting the
following points.
CAUTION:
D Wash each part cleanly before installation in the same
fluid as the one used in master cylinder reservoir.
D Never use other fluid or thinner.
D Before installing piston and piston seal to cylinder, apply
fluid to them.
D After reassembling brake lines, bleed air from them.
Piston Seal
Piston seal is used to seal piston and cylinder and to adjust clear-
ance between pad and disc. Replace with a new one at every over-
haul. Fit piston seal into groove in cylinder taking care not to twist
it.
FRONT BRAKE 5B-7
- Quick Links:
- Engine
Hide quick links:
Advertisement
Chapters
Table of Contents
