Date, Time - Siemens SINUMERIK 802D sl Programming And Operating Manual

8.4.6

Date, time

Dialog box for setting the date and time of the control.
Figure 8-34
Input options in the dialog window "Date and time"
● Setting the time
● Setting the date
● Using the time zones
Changing the clock to daylight saving time.
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Dialog box "Date and time"
Enter the time in the "time" fields. You can select whether the time is shown in the 24
hours or 12h format.
In the fields under "Date" select the display format and enter the date.
Set the check mark in the field " Used time zones", and select the country-specific time
zone.
8.4 SYSTEM - "Service display"
System
139