Programming; Setting Principle; Example "Setting The Time Of Day - Siemens Albatros2 RVS46 User Manual

Setting principle

Example "Setting the time of day"

Siemens Schweiz AG
HVAC Products
5.1.2

Programming

Settings that cannot be made directly with the help of operating elements are made
through programming. For this purpose, the individual settings are structured in the
form of operating pages and operating lines, thus forming practical groups of settings.
The following example which shows the setting of the time of day and date shall explain
this.
• When pressing the ESC button, you go back one step; adjusted values will not be
adopted
• If no setting is made for 8 minutes, the unit will automatically return to the basic
display
• Operating lines may be hidden, depending on the type of unit, thev configuration and
user level
Operation Display example
1
Room temperature
0
2
Time of day and date
Text3
Operator section
0
3
Time of day and date
Hours / minutes
0
4
Time of day and date
Hours / minutes
0
User Manual
Handling
Description
You see the basic display.
AUTO
If the basic display is not shown, press
the ESC button to return to it.
Press the OK button.
4 8 12 16 20 24
The bottom section of the display
AUTO
shows a number of operating pages.
Turn the setting knob until operating
page "Time of day and date" appears.
To confirm, press the OK button.
4 8 12 16 20 24
In the bottom section of the display, the
AUTO
first operating line of operating page
"Time of day and date" appears.
Turn the setting knob until operating
line "Hours / minutes" appears.
To confirm, press the OK button.
4 8 12 16 20 24
The display shows the hours flashing.
AUTO
Turn the setting knob until the hours of
the time of day are correct.
To confirm, press the OK button.
4 8 12 16 20 24
37/100
CE1U2353en
22. November 2006