Table of Contents
Advertisement
(IP address, subnet mask, etc.)
!
If the customer intends to use the Ratio external controller from the PC side, this
GW controller printer SD card must be removed from the main machine.
1.7.5 SCANNER OPTION TYPE W3600 (D321)
Accessories
Check the accessories and their quantities against the table below.
1.
SD Card: Scanner
1.
Keytop
Installation
!
Before doing the procedure, turn off the main power switch and unplug the
machine from its power source.
1.
Make sure that the machine is switched off and disconnected from its power source.
2.
Remove the SD card slot cover ("x1).
3.
Insert the scanner SD card into Slot 1.
!
If the printer SD card is in Slot 1, do SP5873-1 to move the scanner
application to the printer application SD card.
4.
Reattach the SD card slot cover ("x1).
5.
On the operation panel, remove the dummy keytop and replace it with the "Scanner"
keytop.
SM
Description
1-63
Installation of MFP Options
Qt'y
1
1
B286/B289
Advertisement
Table of Contents
Troubleshooting
