Ricoh B286 Service Manual page 62

Main Machine Installation (B286)
and push the cleaning blade lever to the left. This keeps the cleaning blade away from
the drum while you move the main machine.
! If you will move the main machine to a different location in the same building, it is not
necessary to set the lever to the left, and it is not necessary to disconnect the main
machine from the roll feeder or table.
! Always push low on the roll feeder or table to move the main machine. If you
do not do this, you can twist and possibly cause damage to the main machine.
Do not push on the main machine while it is installed on top of the roll feeder
or table.
! To prepare the main machine for transport to a different building, disconnect the main
machine and the roller feeder (or table). Attach the drawer to the frame with tape, or
the roll feeder drawer will fall out of the table frame.
! Lift the main machine with one person on each end of the main machine. Be sure to
use the handles in recesses on the sides of the main machine.
To prevent developer and toner spill, never tilt the main machine more than 30° from
!
the horizontal.
B286/B289 1-26 SM