Leveling The Main Machine And Attaching Leg Covers - Ricoh B286 Service Manual

Leveling the Main Machine and Attaching Leg Covers

1. Open the toner hopper cover [1].
2. Set a level [2] on the plate [3] of the development unit.
3. Set the shoes , , ,
4. Use a wrench to adjust the nuts [1] on each foot to raise or lower the main machine at
each corner.
The main machine must be level side-to-side within ±0.15/m.
!
5. Attach the left leg cover [2] and the right leg cover [3].
SM
under the main machine.
1-35
Roll Feeder (B851/B852)
B286/B289