Ricoh B286 Service Manual page 386

SP5-xxx Mode
16
17
18
CERT: Error
Displays a number code that describes the reason for the notification
requesting the certification update.
0
1
68
2
3
4
5
6
CERT: Up ID
69
The ID of the request for certification.
Firm Up Status
83
Displays the status of the firmware update.
Non-HDD Firm Up
84
This setting determines if the firmware can be updated, even without the HDD
installed.
B286/B289
The storing of the certification has failed, and the GW URL is being
notified of the failure of this event.
The certification update request has been received from the GW
URL, the GW URL was notified of the results of the update after it
was completed, but a certification error has been received, and the
rescue certification is being recorded.
The rescue certification of No. 17 has been recorded, and the GW
URL is being notified of the failure of the certification update.
Normal. No request for certification update in progress.
Certification update in progress due to expiration of certification.
SSL error has been issued after the certification has expired.
There has been a shift from a common to individual certification.
There has been a common certification without ID2.
No certification has been issued.
GW URL does not exist.
5-116 SM