Scanner Jams; Scanner Standby Jams - Ricoh B286 Service Manual

Code Location
C Fusing Unit (Exit)
P Original feed
Folder unit entrance (from main
N1
unit)
! The operator must open and close the upper unit to release a jam in the fusing unit.
! If the operator opens and closes the paper exit cover during copying, this is not
recorded in the jam record.
! An original or paper feed jam that occurs just after the main power switch or operation
switch comes on is not recorded in the jam record.

4.3.2 SCANNER JAMS

In the tables below "late" and "lag" have the following meanings:
! Late. Paper (or original) fails to arrive at the sensor location at the prescribed time.
! Lag. Paper (or original) fails to leave the sensor location at the prescribed time.
LE. Leading edge of original or paper.
!
! TE. Trailing edge of original or paper.

Scanner Standby Jams

Code Location
001 Initial jam: Original Set Sensor
Initial jam: Original Registration
Sensor
Initial jam: Original Width Sensor
(A0)
Initial jam: Original Width Sensor
(A1)
Initial jam: Original Width Sensor
(A2)
SM
Code
V1 Manual feeder feed entrance
Folder unit entrance (from
V2
manual feeder)
Display Comment
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
4-29
Jam Code Tables
Location
B286/B289