Installation Overview; Installation Flow - Ricoh B286 Service Manual

! 220-240V, 50/60 Hz, 10A or more
2. Permissible Voltage Fluctuation: ±10%
3. Do not set objects on the power cord.
! Make sure the plug is firmly inserted in the outlet.
! Do not connect the machine to a power source that is shared with other
equipment.

1.1.5 INSTALLATION OVERVIEW

Installation Flow

This copier has these options.
! Roll feeder. You can install a roll feeder with one roll or two rolls. You can also install a
universal Paper Cassette in the roll feeder. You cannot install the paper cassette
without the roll feeder.
! Table. Used as an alternative to the roll feeder, it contains only the lower stacker.
Here is a summary of the sequence recommended for installation of all these options
together.
Installation Flow Diagram
Copier Pre-Installation
Remove the copier from its box. Remove all packing material and tape. Put the copier on
the roll feeder or the table.
'
Roll Feeder (or Table) Installation
'
Install Paper Cassette
'
SP and User Tool Settings for Installation
Do all the SP and User Tool settings for the copier and the installed options.
'
Copier Final Installation
Complete the installation of the copier after you put it on the roll feeder or table, and after
SM 1-3
Preparation
B286/B289