Around the Drum
3.3.4 TRANSFER CORONA, SEPARATION CORONA WIRES
1.
Open the upper unit.
2.
Side covers (See section 3.1.2 "Side Covers.")
Transfer unit [A] (# x 2, " x 2)
3.
Reinstallation
!
At each end of the unit, make sure that the tabs [B] are fully engaged with the studs
[C].
When the tabs are engaged correctly, the caps on the end are fully level.
!
Disassembling the Transfer Unit
1.
Left cap [A] (tab release)
2.
Right cap [B] (tab release)
B286/B289
3-20
SM