Ricoh B286 Service Manual page 474

SP8-xxx Data Log 2
T:FIN Jobs
8061
These SP's total the finishing methods. The finishing method is specified by the
application.
C:FIN Jobs
8062
These SP's total finishing methods for copy jobs only. The finishing method is
specified by the application.
P:FIN Jobs
8064
These SP's total finishing methods for print jobs only. The finishing method is
specified by the application.
S:FIN Jobs
These SP's total finishing methods for scan jobs only. The finishing method is
8065
specified by the application.
Note: Finishing features for scan jobs are not available at this time.
L:FIN Jobs
These SP's total finishing methods for jobs output from within the document
8066
server mode screen at the operation panel. The finishing method is specified
from the print window within document server mode.
O:FIN Jobs Not Used
These SP's total finishing methods for jobs executed by an external
8067
application, over the network. The finishing method is specified by the
application.
806x 1 Sort
806x 2 Stack
806x 3 Staple
806x 4 Booklet
B286/B289
Number of jobs started in Sort mode. When a stored copy job is
set for Sort and then stored on the document server, the L:
counter increments. (See SP8066 1)
Number of jobs started in Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
5-204
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
SM