Ricoh B286 Service Manual page 335

9 Plain Paper: Mode5: Horiz
10 Plain Paper: Mode5: Vert
11 Translucent: Mode5: Horiz
12 Translucent: Mode5: Vert
13 Film: Mode5: Horiz
14 Film: Mode5: Vert
15 Recycled Paper: Mode5: Horiz
16 Recycled Paper: Mode5: Vert
2923 Execute Cleaning Blade Replace Mode
Always do this SP after replacing the OPC or cleaning blade.
This SP applies a small amount of toner to the drum and blade to reduce
friction between the new drum and/or new blade. This prevents scratching the
drum or bending the blade.
2924 Developer Mixing: Warmup
Enables/disables measurement of Vsg during warm-up immediately after the
machine is switched on. Vsg sampling is done to ensure good quality for the
first copies.
[0 to 2/0/1]
0: Vsg is read immediately after the machine is switched on with the fusing
temperature less than 50°C (122
1: Vsg is always read during warm-up immediately after the machine is
switched on, regardless of the fusing temperature level.
2: Vsg is not read during warm-up.
SM
o
F).
5-65
SP2-xxx Drum
B286/B289