Ricoh B286 Service Manual page 407

Setting 2
This SP codes sets the optional
setting for message log time
2
stamp. Bit 7 is the 5682
message log where the
following are set:
5844 USB
1 Transfer Rate
Sets the speed for USB data transmission.
[Full Speed], [Auto Change]
2 Vendor ID
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000~0xFFFF/1] DFU
3 Product ID
Sets the product ID.
[0x0000~0xFFFF/1] DFU
4 Device Release No.
Sets the device release number of the BCD (binary coded decimal) display.
[0000~9999/1] DFU
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
SM
Bit
0-6 Not Used
Message log
7 1: mm:ss:ms
0: mm:ss (time)
5-137
SP5-xxx Mode
B286/B289