3.6.3 ROLL 2 PAPER CLUTCH, FEED ROLLER
!
The procedure is for the B642 only.
1.
Open the roll feeder drawer.
2.
Remove paper roll 2 (at the rear).
3.
Roll 2 feed clutch cover [A] (" x 2)
Roll 2 feed clutch [B] (# x 1, $ x 1)
4.
5.
Roll 2 feed rollers [C] ($ x3, bushings x 2)
6.
After you replace the roller or the clutch, adjust the cut length with SP 1920-211 and
SP 1920-215. (See section 3.11.1 "Image Adjustment with SP Codes.")
SM
3-35
Paper Feed
B286/B289