Ricoh B286 Service Manual page 371

5162 App. Switch Method
Determines if the application screen changes with a hardware switch or a
software switch.
[0 to 1/1]
0: Soft Key Set
1: Hard Key Set
5169 CE Login
This SP enables and disables the CE log in mode. With this SP enabled, the
machine is in the CE (Customer Engineer/Service Technician) login mode.
In the CE login mode:
! The machine power can be turned off and on in the SP mode, and it will
remain in the SP mode after power is restored.
! This SP is automatically reset to "0" (disabled) after the service technician
closes the SP mode with the [Exit] soft button or after the log out timer
expires.
Note: The Auto Logout Timer is in the "System Settings" of UserTools.
*0: Disable, 1: Enable
0: CE login mode disabled.
1: CE login mode enabled.
5180 Charge Counter Method Japan Only
This SP codes sets the charge counter method.
[0 to 1/1/1]
0: Count number of sheets by paper size
1: Count frequency by paper size
5188 Copy NV Version DFU
This SP displays the NVRAM version to determine whether the NVRAM has
been initialized. Used during debugging.
SM 5-101
SP5-xxx Mode
B286/B289