Ricoh B286 Service Manual page 415

Complexity Option 2
Use this SP to set the conditions for password entry to access the local address
book. Specifically, this SP limits the password entry to lower case and defines
the length of the password.
63
[0 to 32/1]
Note:
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a group
password policy to control access to the address book.
Complexity Option 3
Use this SP to set the conditions for password entry to access the local address
book. Specifically, this SP limits the password entry to numbers and defines the
length of the password.
64
[0 to 32/1]
Note:
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a group
password policy to control access to the address book.
Complexity Option 4
Use this SP to set the conditions for password entry to access the local address
book. Specifically, this SP limits the password entry to symbols and defines the
length of the password.
65
[0 to 32/1]
Note:
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a group
password policy to control access to the address book.
FTP Auth. Port Settings
91 Sets the FTP port to get the delivery server address book that is used in the
individual authorization mode.
[0 to 65535/1]
SM 5-145
SP5-xxx Mode
B286/B289