Ricoh B286 Service Manual page 308

SP1-xxx Feed
1932 Target Temp: Press.Roller
Sets the target fusing temperature of the pressure roller for plain paper,
translucent paper, and film. These temperatures are used for pressure roller
feedback. Turn the machine power off/on after changing the settings.
Important:
! Modes "1" to "5" below refer to the paper type and thickness settings
selected in User Tools (see "Paper Thickness Default Selection" in this
section).
! After adjusting these SP's, you must turn the machine power off/on.
1 Plain: Mode1
2 Plain: Mode2
3 Plain: Mode3
4 Plain: Mode4
5 Plain: Mode5
6 Trans.: Mode1
7 Trans.: Mode2
8 Trans.: Mode3
9 Trans.: Mode4
10 Trans.: Mode5
11 Film: Mode1
12 Film: Mode2
13 Film: Mode3
14 Film: Mode4
15 Film: Mode5
16 Plain: Low Temp Mode
B286/B289
o
[60 to 80 /100/5 C]
o
[60 to 80 /85/5 C]
o
[60 to 80 /60/5 C]
o
[60 to 80 /130/5 C]
o
[60 to 80 /100/5 C]
o
[60 to 80 /60/5 C]
o
[60 to 80 /120/5 C]
5-38 SM