Ricoh B286 Service Manual page 91

1. Attach the lower output trays [1] to the bottom rear of the table (x 3).
The lines and numbers embossed on the back of the main machine (see the
!
upper left of the above diagram) show where to position the exit guide plates
for different paper widths.
2. Position the right exit guide plate [1] as shown then attach it with its magnet.
3. Position the left exit guide plate [2] as shown then attach it with its magnet.
4. Do a test print to confirm that the paper exits the main machine straightly and smoothly
between the guide plates.
SM 1-55
Table (B854)
B286/B289