Side Covers - Ricoh B286 Service Manual

Common Procedures
.
Reinstallation
! The copy-exit selection lever must be up. In this position, the user can set the paper
feed exit on the operation panel with the "Upper Copy Output" key. This key is disabled
with the lever down and the copies always feed out at the rear.

3.1.2 SIDE COVERS

1. Open the original feed unit [A].
2. Open the upper unit [B].
3. Remove the left upper cover [C] (" x 2).
! If necessary, push in the release button [D] to remove the cover.
4. Remove the left cover [E] (" x 3).
5. Do Steps 3 and 4 to remove the right upper cover and right cover.
Reinstallation
! Make sure the original feed unit and upper unit are open.
! Always install the lower covers before the upper covers.
! If necessary, push in the upper unit release buttons [D] when you attach the upper
covers.
B286/B289 3-2 SM