Attaching the Lower Output Tray, Exit Guide Plates
1.
Attach the lower output trays [1] to the lower rear of the roll feeder (x 3).
!
The lines and numbers embossed on the back of the main machine (see the
upper left of the above diagrams) show where to position the exit guide plates
for different paper widths.
2.
Position the right exit guide plate [1] as shown then attach it with its magnet.
3.
Position the left exit guide plate [2] as shown then attach it with its magnet.
SM
Roll Feeder (B851/B852)
1-43
B286/B289