Paper Thickness Default Selection - Ricoh B286 Service Manual

SP1-xxx Feed

5.7.1 PAPER THICKNESS DEFAULT SELECTION

Several SP codes in these tables reference the "Paper Thickness Default
!
Selection." The paper thickness is selected on the operation panel before each
copy job. The default settings can selected with the User Tools.
To display the panel shown above:
[User Tools]> "System Settings"> "Tray Paper Settings"> "Next"> "Paper Thickness:
!
Paper Tray" or "Paper Thickness: Paper Bypass.
! These settings are used to change the fusing temperature and amount of pressure
applied by the pressure roller on the hot roller.
! Each numbered button (1 to 5) represents a "mode" (Mode 1 to Mode 5). These
references to "modes" are used in several SP codes below.
! The modes for thicker paper are to the left of the "3" button and those for thinner paper
to the right of the "3" button.
! Touching a button on the left raises the fusing temperature and pressure applied by the
pressure roller on thicker paper. Touching a button on the right lowers the temperature
and lowers the pressure for thinner paper.
! These settings can be done independently for paper fed from either the paper cassette
or the bypass tray.
B286/B289 5-36 SM