Ricoh B286 Service Manual page 318

SP1-xxx Feed
1942 Press FB Temp Hold Int: Normal
This SP sets the interval between temperature samplings for pressure roller
feedback control.
Note: Modes "1" to "5" below refer to the paper type and thickness settings
selected in User Tools (see "Paper Thickness Default Selection" in this section).
1 Plain: Mode1
2 Plain: Mode2
3 Plain: Mode3
4 Plain: Mode4
5 Plain: Mode5
1943 Press FB Temp High Temp: Special
This SP sets the high temperature used by pressure roller feedback temperature
control for Custom paper.
Note: Modes "1" to "5" below refer to the paper type and thickness settings
selected in User Tools (see "Paper Thickness Default Selection" in this section).
1 Plain: Mode1
2 Plain: Mode2
3 Plain: Mode3
4 Plain: Mode4
5 Plain: Mode5
B286/B289
o
[0 to 50/0/5 C]
o
[0 to 50/15/55 C]
o
[0 to 50/0/5 C]
o
[0 to 50/0/5 C]
o
[0 to 50/20/5 C]
o
[0 to 50/0/5 C]
5-48 SM