Ricoh B286 Service Manual page 69

12. Attach the right joint bracket [1] (the spindle [2] must go through the hole). At the same
time, align the plate with the holes for the three screws (blue).
! The joint brackets and screws are provided as accessories with the roll feeder.
13. Attach screws ,
14. While you lift the main machine by its handle [3], set screw
keyhole cutout and tighten it.
15. Tighten screws and
16. Do the above procedure again for the left joint bracket [4].
! The guide plate and screws are provided as accessories with the roll feeder.
SM
but do not tighten them.
.
1-33
Roll Feeder (B851/B852)
in the lower hole of the
B286/B289