Ricoh B286 Service Manual page 382

SP5-xxx Mode
5816 Remote Service
I/F Setting
Turns the remote diagnostics off and on.
[0 to 2/1]
1
0: Remote diagnostics off.
1: Serial (CSS or @Remote) remote diagnostics on.
2: Network remote diagnostics on for @Remote
CE Call
2
Lets the operator engineer start or end of the remote machine check with CSS or
@Remote; to do this, push the center report key
Function Flag
Enables and disables remote diagnosis over the @Remote network.
3
[0 to 1/1]
0: Disables remote diagnosis over the network.
1: Enables remote diagnosis over the network.
SSL Disable
Controls if RCG (Remote Communication Gate) confirmation is done by SSL
during an RCG send for the @Remote over a network intersection.
7
[0 to 1/1]
0: Yes. SSL not used.
1: No. SSL used.
RCG Connect Timeout
8 Sets the length of time (seconds) for the time-out when the RCG (Remote
Communication Gate) connects during a call via the @Remote network.
[1 to 90/1 sec.]
RCG Write to Timeout
9
Sets the length of time (seconds) for the time-out when sent data is written to the
RCG during a call over the @Remote network.
B286/B289 5-112 SM