Ricoh B286 Service Manual page 248

Jam Code Tables
Code
Initial jam: Original Width Sensor
(A3)
Initial jam: Original Width Sensor
(A4)
Initial jam: Original Width Sensor
(B1)
Initial jam: Original Width Sensor
(B2)
Initial jam: Original Width Sensor
(B3)
Initial jam: Original Width Sensor
(B4)
Initial jam: Original Width Sensor
(914)
Initial jam: Original Exit Sensor
008 Next Original Time Limit
006 Original Stop
B286/B289
Location Display
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
P Sensor ON
Next original was set on the
original feed table too early.
Original set sensor detected the
trailing edge of the first original.
P
The paper set sensor detected
the leading edge of the next
original (before the IPU received
the scan end signal).
[Scanner Stop] button was
P
pushed to remove the original.
4-30
Comment
SM