Accessories; Installation; Interface Pcb (D329) - Ricoh B286 Service Manual

! After reattaching the rear cover, open the covers C1 and C2 to confirm that they open
smoothly. If C1 and C2 do not open smoothly, the rear cover is not installed correctly.
Remove it and reinstall it.

1.7.7 INTERFACE PCB (D329)

! The Interface PCB (D329) is required in order to use the external printer option
(D344).

Accessories

Check the accessories and their quantities against the table below.
Description
1. Interface PCB
1. Interface Cable
1. Nylon Clamp
1. Harness Clamp
1. Screws (M4x8)

Installation

! Before doing the procedure, turn off the main power switch and unplug the
machine from its power source.
1. Make sure that the machine is switched off and disconnected from its power source.
SM
Installation of MFP Options
Qt'y
1
1
1
1
1
1-67 B286/B289